Your location
KVM HDMI Wireless Extender
    Publish time 2022-06-28 12:00    

SPECIFICATIONS:

Model No.

HDEX0028M1

Model name

KVM HDMI Wireless Extender

Ports

TX: HDMI IN x1, HDMI OUT x1, AUX IN x1, IR OUT   x 1, RS232 x1, Micro USB x1, DC JACK x1

RX: HDMI OUT x1, AUX OUT x1, IR IN x 1, RS232   x1, USB2.0 x2, DC JACK x1

HDMI input resolution

480P/720P/1080P/2160P@60/50/30/25/24

HDMI loop output resolution

Same as input, with no latency

HDMI output resolution

480P/720P/1080P@60Output 4K@30 when 4K   input

HDMI Audio format

LPCM (48/44.1/32KHZ 16/20/24bit)

Input/output TMDS signal

0.5~1.5Vp-p(TTL)

Input/output DDC signal

5Vp-p(TTL)

Transmission latency

Less than 80ms

Wireless standard

802.11 ac WiFi MIMO technology

Wireless Band

4.900 GHz ~ 5.845 GHz (5GHz ISM Band)

Antenna type

External dual 5dBi gain   antenna

Transmit Output Power

802.11ac /MCS9: 15 dBm ± 1.5 dB

@ EVM -32dB

Transmission distance

100m (in open space)

IR Carrier frequency

20~60KHz

Power adapter specification

Input: AC 100~240V / Output: DC 12V/1.5A

Max working current

TX 400mA, RX 300mA

Working temperature range

0~ +40

Working humidity range

10 to 85%RHNo Condensation

Storage temperature

-10 to 60

Storage humidity

5 ~95%RH(No Condensation)

Size

TX/RX:170.5*74.5*27.5 (mm)

Weight

TX:325g,RX:330g

Accessories

Transmitter   x1, Receiverx1, Manualx1, Power Adaptorx2, Micro USB-USB cable x1, IR Transmitter   cable x1, IR Receiver cable x1


KVM HDMI Wireless Extender

CONNECTION:

Install TX

Step1: Connect HDMI output port of video source (BD player, PC...) to HDMI input port of TX by HDMI cable.

Step 2: If you need a local screen, connect HDMI output port of TX to HDMI input port of TV by HDMI cable.

Step3: Connect the power adapter to TX and wall socket, the TX will power on automatically, the power indicator will turn on.

Step4: In the case of KVM application, you can connect external audio to AUX IN jack and connect RS232 device to RS232 Interface, USB port needs to connect to PC/Android TV box USB port.

Install RX

Step1: Connect HDMI output port of RX to HDMI input port of TV by HDMI cable.

Step2: Connect the power adapter to RX and wall socket, the RX will power on automatically, the power indicator will turn on.

Step3: In the case of KVM application, you can connect headset or power amplifier to AUX OUT jack and connect RS232 device to RS232 Interface. The USB keyboard and mouse are connected to the USB host ports.

Splitter Mode (1 to 1 / 1 to N)

1, Position the toggle switch to SP Mode on both TX and RX.

2, In the SP mode, support one TX and one or multiple RX simultaneous connection. All Rx and Tx should be paired before use.

3, In the case of 1 to N, it is recommended that the number of Rx should not exceed 4.

4, If there’s no signal on the monitor connected to RX, please make sure TX and RX are both switched to SP mode and have been paired together.

Switch Mode (N to 1)

1, Position the toggle switch to SW Mode on both TX and RX.

2, In the SW mode, support one or multiple TX and one RX connection. All TX and RX should be paired before use.

3, TX and RX can only connect after setting the same ID.

4, Two TX/RX cannot have the same ID at the same time, otherwise it will prompt an ID conflict, at this point all the ID indicator lights will flash. You must modify the ID of one of the TX/RX before you can continue using it.

ID setting and display

1, ID setting is required in SW Link mode, TX and RX can only connect after setting the same ID.

2, Click ID button to switch ID value, and long press ID button to switch ID value high/low bit. H indicator lighting when switched to high-bit.

3, In the low-bit display state, four LEDs of 1/2/4/8 represent low ID value 1-15. ID value is the total of what is light on.

How to control the device by using remote control

1, Using the infrared transmission function of this product, you can remote control the source devices and other peripherals that can be controlled by infrared (e.g. air conditioner).

2, Connect the IR Transmitter cable to the IR OUT jack of TX, and aim the IR probe in front of the IR sensor of the video source. (Please find the correct position of IR sensor of the video source or the IR signal won't pass through)

3, Connect the IR Receiver cable to the IR IN jack of RX, and use the source device remote control aiming at IR receiver of the cable to control the source device, the distance between this IR receiver hole and remote control should be within 5m.

How to control the device by using mouse/keyboard

1, Connect the Device Port of TX to PC/ Android TV Box by using a Micro USB-USB Type A Cable.

2, Connect the RX USB Host jack with a mouse or keyboard. After the device is identified, there will be an OSD character showing "HID Driver Loading", and a mouse icon will be displayed at the top of the standby screen.

3, Then you can use the mouse or keyboard to control the PC/ game controller in other room.

RS232 communication through

1, RS232 port allows both input and output signal transition, which makes it possible to monitor and to remote control from the receiver or from the transmitter.

2RS232 serial port baud rate is recommended to set at 115200bps.

Other Notes

1, Proprietary anti-interference technology to  ensure stable streaming in a crowded Wi-Fi environment, support up to 6 sets of equipment running at the same time at one space.

2, TXRX will automatically select a channel with less interference to connect according to the current wireless interference situation.

3, Don’t worry about the data security, this product support AES 128-bit security encryption and WPA2/WPA-PSK/WPA2-PSK authentication protocol to protect data. HDCP supported to protect the content.

4, If the environment is not good, the distance could will be much shorter. At this time, please try to adjust the angle of the antenna or adjust the position of the device. Matter that needs attention: Concrete walls, Brick, Wallpaper, Metal, Bulletproof glass will shorten the signal cover range or cause big signal loss. Please try to avoid these obstacles in the transmission path.

5, When the devices can’t run normally, please try to restart TX and RX, or reset and repair.

6, This product only support 48/44. 1/32KHZ 16/20/24 bit digital audio, please check the source device set to correct audio standard. If the product has no sound or abnormal sound, try to modify the audio output format of the signal source to LPCM/PCM.


Scan And Record US
Market and Solution​​
Service Hotline:400-007-5518