Your location
8*8 Video matrix by using infrared, RS232, and LAN and supplied remote control.
    Publish time 2022-06-28 14:26    

HDMX0008M1 offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

8*8 Video matrix by using infrared, RS232, and LAN and supplied remote control.


l  Allows up to eight HDMI audio/video devices to be independently switched to eight HDMI monitors, HDTV’s, or projectors.

l  The eight output channels could show the same or different source simultaneously no matter the source is HDCP or not.

l  Reading and saving EDID function from displays.

l  Support high definition resolutions, including:

1080p@60Hz@36 b/pixels, 3D, 1080i, 720p and other standard video formats.

l  Each port support both HDMI and DVI inputs.

l  With extra infrared extension receiver.

l  Four switching modes: panel buttons, local IR, RS232 and Ethernet.

l  HDCP compliant

l  HDMI 1.3 supported.

Package Contents

      1x Main unit. P/N_ HDMX0008M1.

      1x Remote.

      1x IR RX (IR receiver cable).

      1x RS232 converter.

      12V/DC Power Supply. P/N_VDC01205.

      Operating Instructions. P/N_INS HDMX0008M1.

      Mounting ears.

&  NOTE: PART NUMBER (Abbreviation as P/N).

Connections and Operations

1)     Connect the HDMI input source (such as HD-DVD/ PS3/STB etc.)Into HDMX0008M1.

2)     Connect HDMI OUT of HDMX0008M1 to display equipment.

3)     Connect the Broadband IR receive cable into HDMX0008M1 IR RX ports.

4)     Power on the input source you want to show. (Keep the unused input power off, otherwise it may interfere the normal display).

5)      Plug the power cable into HDMX0008M1.

6)      Turn on the power, when the LED panel stops flashing circularly, the initialization of the matrix are ready.

7)      Turn on the displays you want to watch.

8)      Use the remote to control the matrix, or using Front Panel, RS232 and LAN port to control.

Control via IR remote.

User can control the HDMI route of the matrix by using the IR remote. There are two group key pads for sixteen ports. Press the output source selection button in order to choose which input port corresponds to the desired output port. (For example: Output 8 select Input 7, first press output 8, then press input 7, LCD display 8-7)

Scan And Record US
Market and Solution​​
Service Hotline:400-007-5518